KVM Switch Direct we sold our first KVM switch in 1988. Today 70% of our sales remain offline to Systems Integrators Corporates and Government


For impartial help and advice backed by 25 years experience call us now
RETAIL: 01372 451345     TRADE: 01372 458080

Cat 5/6 VGA Distribution

KVM Switch Direct | SY Electronics |  Cat 5/6 VGA Distribution


CatXVideoTX2: 2 Port SVGA Splitter and extender
2 Port SVGA Splitter and extender CatX Video TX2 is a 2 port VGA transmitter unit. Connected to the video output of a PC this unit may be used in conjunction with different CatX Video Rx units to a VGA display. Easy to install and no software is required.

This unit requires one of the following receiver units to operate:
  • CatX Video Rx for distances up to 120m
  • CatXQ Video Rx for distances up to 300m
  • CatX Video Rx 2 for two VGA outputs up to 120m
  • CatXQ Video Rx 2 for two VGA outputs up to 300m (includes skew correction)


77.62 (93.14 Including VAT at 20%)  

Quantity:    

CX-OW-AVP-2X8: 2x8 VGA and Audio Matrix over Cat5/6 Transmitter Unit
2x8 VGA and Audio Matrix over Cat5/6  Transmitter Unit

The CatX AVP Matrix 28 transmitter routes two VGA video sources over cat5 or cat6 cable, in any combination, to a maximum of eight displays, depending on the display resolution. Designed for ease of installation, this unit will broadcast VGA video and audio over cat6 UTP cable at 720p/1080i. This product connects direct to the two VGA sources, there is no local VGA output on this device. A built-in web interface facilitates the routing of the input and output settings and aslo provides diagnostic information.The Ethernet interface only allows access from authenticed users (one administrator and many operators) and is securely protected against malicious attacks. These units use a state of the art chip set thus ensuring compatibility and reliability

  • Two VGA sources to up to eight outputs
  • Input to output routing can be in any combination
  • Web interface controls VGA routing
  • Outputs selectable for AV or VP mode
  • EDID via DDC output to VGA source
  • Web interface for full diagnotic capabilities
  • 10Base-T and 100Base-TX Ethernet connectivity
  • User authentication control and secure protection
  • Future firmware updates via Ethernet port

Note: The maximum resolution / distance values depend on the receiver used (this is a transmitter unit only the image depicts front and rear of the unit)



495.00 (594.00 Including VAT at 20%)  

Quantity:    

KVM Switch Direct | SY Electronics |  Cat 5/6 VGA Distribution

Trade in your old rack console drawer

 

 

 

Adder Global Partner

 

Aten Authorised Partner

 

Authorised Distributor

 

SY Electronics Authorised Distributor

 

Satisfaction Guaranteed

 

Free Delivery

 

 

spacer
Live Chat Software by Click4Assistance UK