KVM Switch Direct | Power control | Remote Power Switching
Enable the remote power control of one device over the Internet, Intranet, or locally through a serial RS232 connection. The 1 Guard provides all the functionality of the M8 Master ePower Switch but with only one switchable output making it ideal for rebooting a server or router. In addition, the switch can supervise the connected IP device and automatically reboot in the case of lock-up.
PDUeX Switched PDU Series is equipped with a smart current-meter (True RMS) that shows the total power consumption of the PDU. It comes with user friendly PDU management software, allowing Datacentre Managers to remotely control and monitor multiple PDU power consumption.
With PDUeX Switched PDU Series you can:
Please telephone 01372 451345 for product variants and prices
Enable the power management of 8 devices through an RS232 terminal connection. The S8 Slave is power distribution and control unit that can be used either as a slave to the M8 or connected to the AdderLink IP (and other Adder KVM switches*) to provide total remote control of connected servers and their associated power supplies. Power can then be recycled across a number of ports and selected securely from an integrated On-Screen-Display menu. Controlled power outlets can be extended up to 32 by cascading up to four slave models using one RS232 connection (total load 80 A / 230 V).
Dominion PX datasheet
The Cascadable PDUexpert KWX-N4 Series is part of a new generation of PDU which combines network power distribution, environmental monitoring and real-time remote power consumption data showing total current load and voltage along with each outlet's ON/OFF status.
The KWX-N series is a remote monitor PDU with embedded multithreading inner core RTOS (Real Time Operating Systems), that supports multitask and multiuser access. The software supports various TCP/IP protocols, including HTTP, HTTPS, SSL, SNMP, TELNET, SSH, SMTP etc.
Altusen's PN0108 is equipped with eight hotpluggable ports for easy server rooom management. Each port can be individually controlled so that users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order. Note this is a slave unit and must be used in conjunction with the PN9108 or CN8000