The VE066 Mini Cat 5 DVI Extender allows you to increase the distance between your DVI display and DVI source by up to 20 m using only one Cat 5e or Cat 6 cable, providing a convenient way to replace heavy and expensive DVI cables. With hot-plugging support, easily add or remove the VE066 Transmitter connected to the source or the VE066 Receiver connected to the display without having to power down the devices. Compatible with all ATEN DVI switches and DVI splitters, the VE066 Mini Cat 5 DVI Extender is a compact, convenient and economical way to extend your DVI display.

Cat5 CablingData Sheet

Price: £21.45 (£25.74 Including VAT at 20%)  
AWAITING STOCKIN STOCK

• Requires only one Cat 5e or Cat 6 cable to extend DVI and audio signals up to 30 m
• Fully compliant with DVI 1.0 specification
• Audio enabled for stereo speaker connection
• Supports VESA standard display resolutions and HDTV resolutions
• Supports DDWG standard for DVI compliant monitors
• Picture compensation improves video quality over long distances
• Superior video resolution - up to 1280 x 1024 @ 60Hz (PC) and 1080i(HDTV)
• DDC pass through
• Compliant with the console and computer ports of all ATEN DVI video switches, splitters, extenders and converters

DatasheetQuick start quide

Utilising cost effective and readily available Cat5e/6 cable and in conjunction with the DVI-E101T transmitter Unit, these units allow extended distances to be quickly and easily covered between AV source and display devices. This 1 Port self-powered receiver is designed for short range transmission up to 10 metres.1280 x 1024 @ 10m or 1024 x 768 @ 20m

Used in conjunction with the DVS-DR

Price: £55.00 (£66.00 Including VAT at 20%)  
AWAITING STOCKIN STOCK

The CatX DVI 180 transmitter and receiver pair sends DVI video over a single cat5 or cat6 cable up to 180m, depending on the display resolution. Designed for ease of installation, this unit will broadcast HD digital video, audio and RS232 over cat6 UTP cable at 1080p up to 180m. This product connects directly to the DVI source but there is no local DVI output on this device.

• DVI 1.0 compliant
• HDCP 1.1 compliant
• Analogue audio in both directions
• Supports transparent EDID transfer
• Provides USB for keyboard + mouse (USB HID devices only)
• Simple duplex RS232 control up to 115 kbaud (TxD and RxD Only)
• Supports a range of IR controllers
• Low latency (less than 0.5us)
• Only one Cat6 cable required

*** Transmitter unit only - used in conjunction with CX-DV180-R***

The CatX DVI 180 transmitter and receiver pair sends DVI video over a single cat5 or cat6 cable up to 180m, depending on the display resolution. Designed for ease of installation, this unit will broadcast HD digital video, audio and RS232 over cat6 UTP cable at 1080p up to 180m. This product connects directly to the DVI source but there is no local DVI output on this device.

• DVI 1.0 compliant
• HDCP 1.1 compliant
• Analogue audio in both directions
• Supports transparent EDID transfer
• Provides USB for keyboard + mouse (USB HID devices only)
• Simple duplex RS232 control up to 115 kbaud (TxD and RxD Only)
• Supports a range of IR controllers
• Low latency (less than 0.5us)
• Only one Cat6 cable required

*** Receiver unit only - used in conjunction with CX-DV180-T***

The CatX DVI 180 transmitter and receiver pair sends DVI video over a single cat5 or cat6 cable up to 180m, depending on the display resolution. Designed for ease of installation, this unit will broadcast HD digital video, audio and RS232 over cat6 UTP cable at 1080p up to 180m. This product connects directly to the DVI source but there is no local DVI output on this device.

• DVI 1.0 compliant
• HDCP 1.1 compliant
• Analogue audio in both directions
• Supports transparent EDID transfer
• Provides USB for keyboard + mouse (USB HID devices only)
• Simple duplex RS232 control up to 115 kbaud (TxD and RxD Only)
• Supports a range of IR controllers
• Low latency (less than 0.5us)
• Only one Cat6 cable required

The ADDERLink X-DVI PRO-MS is Adder’s second generation extender to transmit two DVI video streams or two HDMI streams, Audio, USB 2.0 and audio over CATx cable.

The ADDERLink X-DVI PRO-MS allows users to extend control of any computer with multiple screen outputs and USB 2.0 over distances up to 50 meters with resolutions up to 165 MPixels per second (e.g. 1920x1200 @ 60Hz or 3840 x 2400 @ 17Hz). In operation, the X-DVI PRO-MS is truly plug and play, capturing full EDID data from the screen ensuring your hardware is always setup to deliver optimal display performance.

Data sheet

The CatX DVI Fibre transmitter and receiver pair from SY Electronics sends DVI video over a single multimode fibre optic cable up to 550m, depending on the display resolution. Designed for ease of installation, this unit will broadcast HD digital video, audio and RS232 over a single multimode fibre optic cable up to 550m.This product connects direct to the DVI source and there is no local DVI output on this device.These units use a state of the art chip set thus ensuring compatibility and reliability

• DVI 1.0 compliant
• HDCP 1.1 compliant
• Analogue audio in both directions
• Supports transparent EDID transfer
• Provides USB for keyboard + mouse (USB HID devices only)
• Simple duplex RS232 control up to 115 kbaud (TxD and RxD Only)
• Supports a range of IR controllers
• Low latency (less than 0.5us)
• Only one multimode fibre cable required

Product Manual

*** Transmitter unit only - used in conjunction with CX-DVF5-R***

The CatX DVI Fibre transmitter and receiver pair from SY Electronics sends DVI video over a single multimode fibre optic cable up to 550m, depending on the display resolution. Designed for ease of installation, this unit will broadcast HD digital video, audio and RS232 over a single multimode fibre optic cable up to 550m.This product connects direct to the DVI source and there is no local DVI output on this device.These units use a state of the art chip set thus ensuring compatibility and reliability

• DVI 1.0 compliant
• HDCP 1.1 compliant
• Analogue audio in both directions
• Supports transparent EDID transfer
• Provides USB for keyboard + mouse (USB HID devices only)
• Simple duplex RS232 control up to 115 kbaud (TxD and RxD Only)
• Supports a range of IR controllers
• Low latency (less than 0.5us)
• Only one multimode fibre cable required

Product Manual

*** Receiver unit only - used in conjunction with CX-DVF5-T ***

The CatX DVI Fibre transmitter and receiver pair from SY Electronics sends DVI video over a single multimode fibre optic cable up to 550m, depending on the display resolution. Designed for ease of installation, this unit will broadcast HD digital video, audio and RS232 over a single multimode fibre optic cable up to 550m.This product connects direct to the DVI source and there is no local DVI output on this device.These units use a state of the art chip set thus ensuring compatibility and reliability

• DVI 1.0 compliant
• HDCP 1.1 compliant
• Analogue audio in both directions
• Supports transparent EDID transfer
• Provides USB for keyboard + mouse (USB HID devices only)
• Simple duplex RS232 control up to 115 kbaud (TxD and RxD Only)
• Supports a range of IR controllers
• Low latency (less than 0.5us)
• Only one multimode fibre cable required

Product Manual

Pure digital media extension over IP. Featuring Full DVI, Digital Audio, USB True Emulation, Network Multicast, Device Switching and EPG style user interface. Taking advantage of high bandwidth Gigabit IP networks, the range offers users the ability to select 'content channels' from the receiver and instantly switch.

The INFINITY range is capable of extending almost any USB 2.0 device, and has been further optimised for both HID and mass storage connections.

INFINITY is an extender
It extends DVI/USB/Audio, and soon Serial, data over
arbitrary distances.
INFINITY is a KVM switch
It enables switching of multiple sources to multiple
destinations all dynamically configurable.
INFINITY is a thin client
It replaces the need for a full PC on the desktop.
INFINITY uses standards
Standard protocols, standard wiring, standard
networks.

Further information on the INFINITY seriesData SheetINFINITY user guide

TRANSMITTER UNIT ONLY

used in conjunction with AdderLink Infinity receiver units

Further information on the INFINITY seriesDataSheetINFINITY user guide

RECEIVER UNIT ONLY

used in conjunction with AdderLink Infinity transmitter units

Further information on the INFINITY seriesData SheetINFINITY user guide

The ADDERLink INFINITY dual features full DVI connectivity for either dual link or dual head applications. DVI delivers native digital video signals from your computer to your digital panel (LCD for example) without the need to convert signal types from the digital domain. By delivering native digital video throughout the ADDERLink INFINITY network, you can be assured of accuracy on each and every pixel.

Further information on the INFINITY dualData SheetINFINITY User guide

TRANSMITTER UNIT ONLY

used in conjunction with AdderLink Infinity Dual receiver units

Further information on the INFINITY dualData SheetINFINITY User guide

RECEIVER UNIT ONLY

used in conjunction with AdderLink Infinity Dual Transmitter unit

Further information on the INFINITY dualData SheetINFINITY User guide

ADDERLink INFINITY FX is a dual head (2 x 1920x1200), dual link (1 x 2560x1600) DVI KVM extender over fibre. Delivering DVI and bi-directional USB, Audio and RS232 across distances up to 500 metres with no lossy compression and minimal lag.

As part of the ADDERLink INIFINITY range, this KVM extender can easily be integrated into a wider matrix at any point, or kept as a robust point to point extender.

Further information on the INFINITY FXData Sheet

ADDERLink INFINITY FX is a dual head (2 x 1920x1200), dual link (1 x 2560x1600) DVI KVM extender over fibre. Delivering DVI and bi-directional USB, Audio and RS232 across distances up to 10 Kilometres with no lossy compression and minimal lag.

As part of the ADDERLink INIFINITY range, this KVM extender can easily be integrated into a wider matrix at any point, or kept as a robust point to point extender.

Further information on the INFINITY FXData Sheet

Please telephone 01372 451345 for prices and stock levels

Please telephone 01372 451345 for prices and stock levels