The VE800 HDMI Extender extends your HDMI display up to 60 m away from your HDMI source using two Cat 5e or Cat 6 cables. It is equipped with HDMI (high definition multimedia interface) connectors and is capable of supporting DVI (digital visual interface) equipment when used with a HDMI-to-DVI adapter, providing greater flexibility and installation options when integrating several home theatre components.

• Extend 1080p by 40m; extend 1080i (HDTV) by 60m
• Superior video quality 1920 x 1200, up to 1080p
• HDMI (3D, Deep Color)
• 8 segment equalization adjustment switch
• HDCP 1.1 Compatible
• Compatible with all ATEN HDMI switches and splitters
• DDC compatible

Datasheet

The VE810 HDMI Extender extends your HDMI display up to 60 m from your HDMI source device using two Cat 5e cables. In addition, VE810 is equipped with IR signaling pass-through which allows the IR channel to control from the remote to local unit, to control the HDMI source, or from the local to remote unit, to control the display device.

• Extend 1080p by 40 m; extend 1080i (HDTV) by 60 m
• Superior video quality 1920 x 1200 @ 60Hz , up to 1080p
• HDMI (3D, Deep Color)
• Supports Dolby True HD and DTS HD Master Audio
• HDCP 1.1 compatible
• Compatible with all ATEN HDMI switches and splitters
• DDC compatible
• only require one power adapter

Datasheet

The CatX HDMI Tx units broadcast a sharp, high quality video and audio signal up to 90m using low cost Cat6 cabling. Cat5 cable will give good results at distances up to 40m. The CatX HDMI Transmitter units can connect to any HDMI source using any good quality HDMI cable up to 20m from the transmitter.

The CatX HDMI transmitter unit connects to any single cat5 CatX HDMI Receiver or CatX HDMI Repeater using low cost UTP networking cable. Designed for commercial environments (24/7 reliability), CatX HDMI Tx will broadcast HD digital video and audio over cat6 UTP cable at 720p/1080i up to 65m or at 1080p up to 50m. This CatX HDMI transmitter unit also incorporate an EDID facility and is HDCP compliant for use with Blu-Ray and Satellite video sources

• HDMI 1.3c and DVI compliant
• HDCP compliant for use with Satellite and Blu-Ray systems
• Supports EDID
• Automatic adjustment - no manual set up required
• Low power consumption
• Designed for 24/7 operation

The CatX HDMI Tx units broadcast a sharp, high quality video and audio signal up to 90m using low cost Cat6 cabling. Cat5 cable will give good results at distances up to 40m. The CatX HDMI Transmitter units can connect to any HDMI source using any good quality HDMI cable up to 20m from the transmitter.

The CatX HDMI transmitter unit connects to any single cat5 CatX HDMI Receiver or CatX HDMI Repeater using low cost UTP networking cable. Designed for commercial environments (24/7 reliability), CatX HDMI Tx will broadcast HD digital video and audio over cat6 UTP cable at 720p/1080i up to 65m or at 1080p up to 50m. This CatX HDMI transmitter unit also incorporate an EDID facility and is HDCP compliant for use with Blu-Ray and Satellite video sources

• HDMI 1.3c and DVI compliant
• HDCP compliant for use with Satellite and Blu-Ray systems
• Supports EDID
• Automatic adjustment - no manual set up required
• Low power consumption
• Designed for 24/7 operation

CatX HDMI receiver units will output a sharp high quality video and audio signal up to 90m depending on the resolution. The CatX HDMI receiver unit can connect to any HDMI display device using good quality HDMI cable up to 20m from the receiver

The CatX HDMI receiver unit connects to any single cat5 CatX HDMI Transmitter or Repeater unit using low cost UTP cable Maximum distances 0f 90m at 576p, 65m at 720p or 50m at 1080p..

• HDMI 1.3c and DVI compliant
• HDCP compliant for use with Satellite and Blu-Ray systems
• Supports EDID
• Automatic adjustment - no manual set up required
• Low power consumption
• Designed for 24/7 operation

CatX HDMI Repeater outputs a sharp high quality video and audio signal up to 90m, depending on the resolution. CatX HDMI Repeater units can be linked together via Cat6 cable in a daisy chain. This can extend a single HDMI source up to 300m. Designed for commercial environments (24/7 reliability and low power), CatX HDMI Repeaters will output HD digital video and audio over cat6 UTP cable at 720p/1080i up to 65m or at 1080p up to 50m. Display quality is maintained when multiple repeaters are linked together.

The CatX HDMI repeater unit can be connected to any HDMI output device using a quality HDMI cable up to 20m from the Repeater.

• HDMI 1.3c and DVI compliant
• HDCP compliant for use with Satellite and Blu-Ray systems
• Supports EDID
• Automatic adjustment - no manual set up required
• Low power consumption
• Designed for 24/7 operation

The ADDERLink X-DVI PRO-MS is Adder’s second generation extender to transmit two DVI video streams or two HDMI streams, Audio, USB 2.0 and audio over CATx cable.

The ADDERLink X-DVI PRO-MS allows users to extend control of any computer with multiple screen outputs and USB 2.0 over distances up to 50 meters with resolutions up to 165 MPixels per second (e.g. 1920x1200 @ 60Hz or 3840 x 2400 @ 17Hz). In operation, the X-DVI PRO-MS is truly plug and play, capturing full EDID data from the screen ensuring your hardware is always setup to deliver optimal display performance.

Data sheet