Video adapters and converters

Mini display port is simply a smaller version of the display port, mini display port is mainly used on MAC computers but other manufacturers may adopt this type of connector.

The mini display port to DVI adapter will allow you to connect a high definition monitor, Projector or LCD TV to a MacBook, MacBook Pro or a MacBook Air with a mini display port connection. Please note that while it has a DVI-I connector, this is for digital displays only.

The HDMI repeater unit is used to chain two HDMI cables together to create a longer HDMI extension. It works by regenerating the high definition video and digital audio it receives from the source, transmitting it along the second cable for perfect display at a greater distance.

• Extend cable length up to 35 metres
• Maximum input: 20m (using 24 AWG cable)
• Maximum output: 15m (using 24 AWG cable)
• Supports: 4k x 2k, 1080p and 3D
• Bandwidth: 10.2 Gbps
• Input: 1x HDMI female port
• Output: 1x HDMI female port
• Dimensions: 51 (L) x 28 (W) x 13 (H)mm

• DisplayPort 1.1a compliant offering 5.4 Gbps bandwidth over 2 lanes
• Integrated tripple 10-bit 162 MHz DAC for Analogue VGA signal output
• Supports up to 1080p, 1920x1200 reduced blanking video
• EDID passthrough from PC source to display
• Spread Spectrum for EMI reduction

The Mini DisplayPort to DVI Adapter allows you to connect a device with a Mini DisplayPort to a Display with a DVI connector.

The adapter is perfect for Mac series products, including MacBook, MacBook Pro, MacBook Air, Mac mini and Mac Pro.

While it appears to have the DVI-I 29 pin connector it only uses the analog pins for SVGA. This is ideal for connecting SVGA equipment to a DVI-I or DVI-A source or vice versa.

Can be used to connect a VGA Monitor to a DVI-A port. or between a DVI-A port on your computer to a VGA port on a KVM Switch

This cable will not work with DVI-D equipment

Adapts a standard VGA cable into a DVI-A connection.

Note: This does not convert digital to analogue. The DVI device must be capable of receiving an analogue signal

ADDER DVA is a high performance VGA to DVI-D video converter that transforms analog signals to digital. Placed in-line and USB powered this solution fits well with the AdderLink Infinity range of products. It converts VGA signals, up to 1920 x 1200 @ 60Hz, into a DVI standard equivalent.

• Analog to digital video conversion up to 1920 x 1200 (165MHz max. pixel frequency)
• EDID management to ensure clean operation
• Adjustment control for alignment, tone, sharpness and brightness
• Adjustment control for alignment, tone, sharpness and brightness
• USB powered with USB feed through

Data SheetDVA User guide

• Easy to add a second or even a third DVI Monitor via the USB2 port.
• Extend and clone mode available
• Supports Video resolution of up to 1600x1200 at a refresh rate of 60Hz.
• Power-free operation
DDC2B Support

Note that interlaced modes are not supported



£39.00 (£46.80 Including VAT at 20%)  
AWAITING STOCKIN STOCK



Quantity:

The Mini DisplayPort to HDMI Adapter allows you to connect a device with a Mini DisplayPort to a Display with a HDMI connector.

The adapter is perfect for Mac series products, including MacBook, MacBook Pro, MacBook Air, Mac mini and Mac Pro.

Adapts a standard VGA cable into a DVI-A connection.

Note: This does not convert digital to analogue. The DVI device must be capable of receiving an analogue signal

The DVI-D to HDMI adapter passes DVI-D signals through to the compatible pins in the HDMI spec for use with HDMI equipment.

Please note while this uses the DVI-D 25pin dual link connector this is single link as HDMI is 19pin with a resolution of 1920x1080. DVI-D does not carry audio so the HDMI ouput will not have audio either.

The VC810 is an HDMI-to-VGA converter that allows you to connect an HDMI source (e.g. laptop, PC, ultrabook, etc) directly to a VGA display (e.g. projector, LCD monitor, etc) without upgrading to an HDMI-compatible display at extra cost. It supports frequently used video resolutions of up to 1920 x 1200.

The VC810 is compact and convenient to install with no software needed -simply make the hardware connections. In addition, this plug-n-play converter does not require an external power source, which is ideal for environments like conference room where briefings or presentations take place, ensuring great portability, installation simplicity, and manageability..

Easily convert the analogue video signal from an RGB Component video or a computer VGA connection in to a digital HDMI signal for use with HDMI supported displays. The HDMI output signal is selectable as either a 720p or 1080p HDMI video format.

The converter is a "box-in-the-middle" device with either a VGA or Component cable going into it and a HDMI cable coming out of it. For example the VGA connection found on most laptops can be converted to HDMI for use on HDTVs, enabling better viewing of online media players such as the BBC iPlayer, YouTube, iTV Player, 4OD, Sky Player, Demand 5 etc.

• Dimensions: (W: 127mm H: 35mm D: 106mm)
• Upscaler to 1080p
• 24K gold connectors for maximum corrosion resistance
• Component video + VGA (inputs) to HDMI (female) connection
• Converts analogue video and audio into complete HDMI
• Superior professional robust build-quality & durable construction
• Metal casing with silver paint finish
• Easy to install & Simple plug & play operation
• Supports HDTV/YPbPr
• VGA and audio cables and UK Power supply included

HDMI to DVI cables are for DVI-D use only and come with gold flashed connectors. The HDMI connector uses 19 pins connected to the DVI-D pins on the DVI connector achieving DVI-D single link.

Note: While the connector has the appearance of dual link the dual link pins are not connected, to achieve HDMI to DVI-D dual link, you would need an active adapter cable.

HDMI to DVI cables are for DVI-D use only and come with gold flashed connectors. The HDMI connector uses 19 pins connected to the DVI-D pins on the DVI connector achieving DVI-D single link.

Note: While the connector has the appearance of dual link the dual link pins are not connected, to achieve HDMI to DVI-D dual link, you would need an active adapter cable.

HDMI to DVI cables are for DVI-D use only and come with gold flashed connectors. The HDMI connector uses 19 pins connected to the DVI-D pins on the DVI connector achieving DVI-D single link.

Note: While the connector has the appearance of dual link the dual link pins are not connected, to achieve HDMI to DVI-D dual link, you would need an active adapter cable.

• Easy to add a second or even a third DVI Monitor via the USB2 port.
• Extend and clone mode available
• Supports Video resolution of up to 1600x1200 at a refresh rate of 60Hz.
• Power-free operation
DDC2B Support

Note that interlaced modes are not supported



£39.00 (£46.80 Including VAT at 20%)  
AWAITING STOCKIN STOCK



Quantity: