This extender pair consists of a transmitter (CX-0M-VP-T) and Receiver (CX-0M-VP-R), both of which are available separately

Continuous adjustability ensures perfect picture at any distance up to 150m.

• Compact - CatX Mini units are similar size to a VGA connector.
• Low Cost - CatX Mini can eliminate the use of expensive VGA cables.
• Low Power - Only the CatX Mini AV Rx requires an external power supply.
• Easy Installation - The CatX Mini units fit directly to the VGA connector
• Zero footprint
• CatX VP Rx is directly powered by the Catx VP Tx transmitter

This VGA and Audio extender pair is a combination of transmitter unit (CX-0M-AV-T) and Receiver (CX-0M-AV-R)

The CatX Mini AV Tx unit transmits sharp high quality VGA video and audio. Being only slightly larger than a VGA connector, can fit directly to the VGA source and consumes less than 0.25W taking its power directly from a DDC2B compliant VGA source.

The CatX Mini AV transmitter and receiver units are connected with standard low cost UTP networking cable.

• Compact - CatX Mini units are similar size to a VGA connector.
• Low Cost - CatX Mini can eliminate the use of expensive VGA cables.
• Low Power - less than 0.25W, only the CatX Mini AV Rx requires an external power supply.
• Easy Installation - The CatX Mini units fit directly to the VGA connector
• Zero footprint
• Transmits high resolution SVGA up to 150m
• Transmits high resolution 1080p widescreen HDTV up to 120m

The AdderLink LPV has been designed to deliver stunning results at a really attractive price, making it the perfect introduction to professional digital signage. The AdderLink LPV digital signage extender is possibly the easiest to install point to point extender available today. In addition to its simplicity, the LPV also delivers fantastic Full HD 1080p, 1080i & 720p 150m away.

more info on ALPV150ALPV150 Product Manual

The CatX AV Wall Plate transmitter provides a new solution for transmitting Audio+Video (AV) over a single cat5/6 UTP cable up to 300m. This unit also has DDC/EDID functionality, making operation and setup with any VGA display easy and straight forward. This unit can also be supplied in a variety of Wall plate finishes and formats to match other fittings.This unit has very low power consumption (less than 0.3W). The transmitter connects to a VGA source using a VGA Male/Male cable. The unit can be powered by any DDC2B (or later) compliant VGA source, so no external PSU is required.

• Designed to fit any single gang wall plate
• Low power - less than 0.3W
• Powered by any DDC2B (or later) compliant source
• Easy to Install
• EDID facility
• HD Compatible - Transmits high resolution 1080p widescreen HDTV up to 120m
• Transmits VGA and Audio up to 300m

This transmitter is video compatible with the CatX Mini and AVP range receivers and repeaters

CatX Mini VP units provide a unique solution for transmitting a sharp high quality VGA video and power up to 150m using low cost cat5 cabling. Being only slightly larger than a VGA connector, can fit directly to the VGA source and consumes less than 0.25W taking its power directly from a DDC2B compliant VGA source.

The CatX Mini VP transmitter unit connects to CatX Mini AV Rx or any other CatX AV receiver, using standard low cost UTP networking cable.

• Compact - CatX Mini units are similar size to a VGA connector.
• Low Cost - CatX Mini can eliminate the use of expensive VGA cables.
• Easy Installation - The CatX Mini units fit directly to the VGA connector
• Zero footprint
• Transmits high resolution SVGA up to 150m
• Transmits high resolution 1080p widescreen HDTV up to 120m
• CatX VP Rx is directly powered by the transmitter

The CatX Mini VP Rx unit takes its power directly by CatX Mini VP Tx, eliminating the need for any external PSU. Continuous adjustability ensures perfect picture at any distance up to 150m.

• Compact - CatX Mini units are similar size to a VGA connector.
• Low Cost - CatX Mini can eliminate the use of expensive VGA cables.
• Low Power - Only the CatX Mini AV Rx requires an external power supply.
• Easy Installation - The CatX Mini units fit directly to the VGA connector
• Zero footprint
• CatX VP Rx is directly powered by the Catx VP Tx transmitter

The CatX Mini AV Tx unit transmits sharp high quality VGA video and audio. Being only slightly larger than a VGA connector, can fit directly to the VGA source and consumes less than 0.25W taking its power directly from a DDC2B compliant VGA source.

The CatX Mini AV transmitter unit connects to CatX Mini AV Rx or any other CatX AV receiver, using standard low cost UTP networking cable.

• Compact - CatX Mini units are similar size to a VGA connector.
• Low Cost - CatX Mini can eliminate the use of expensive VGA cables.
• Low Power - less than 0.25W, only the CatX Mini AV Rx requires an external power supply.
• Easy Installation - The CatX Mini units fit directly to the VGA connector
• Zero footprint
• Transmits high resolution SVGA up to 150m
• Transmits high resolution 1080p widescreen HDTV up to 120m

CatX Mini AV Tx can transmit VGA video and audio up to 300m when used with CatXQ AV Rx2.

The CatX Mini AV Rx unit is the same size as the CatX Mini AV Tx, powered from a local 5VDC power supply. Continuous adjustability ensures perfect picture at any distance up to 150m. All CatX AV units are compatible with all CatX Mini and CatX AVP transmitters / receivers. Considered as the smallest VGA cat5 extender system in the market, the small size of the CatX Mini AV units ensures discrete connection to the VGA source and output display; perfect for installations with limited space.

• Compact - CatX Mini units are similar size to a VGA connector.
• Low Cost - CatX Mini can eliminate the use of expensive VGA cables.
• Low Power - Only the CatX Mini AV Rx requires an external power supply.
• Easy Installation - The CatX Mini units fit directly to the VGA connector
• Zero footprint

A VGA Extender over Category 5 cabling up to a resolution of 1024x768

• Ultra compact
• Extend VGA signals for up to 150M
• Use CAT5 cables for easy installation
• Local unit supports two VGA
• Remote unit supports two VGA
• For broadcast, demo and exhibit
• Automatical power-save when VGA input is lost

A VGA and audio extender over Category 5 cabling up to a resolution of 1024x768

• Ultra compact
• Extend VGA and audio signals for up to 150M
• Use CAT5 cables for easy installation
• Local unit supports two VGA
• Remote unit supports two VGA
• For broadcast, demo and exhibit
• Automatical power-save when VGA input is lost

• Supports a local and a remote display
• Transmission distance of up to 150m
• 6 position adjustable video gain control to compensate for distance
• Multiplatform support: supports PC, Mac, Sun, and Linux
• Supports DDC for the local monitor
• OS Support: Windows 2000, Windows XP, Linux, Mac and Sun

The VB552 VGA Over Cat 5 Repeater +Audio is an audio/video signal extension device which is compatible with ATEN Cat 5 Audio/Video splitters. The VB552 extends the audio/video transmission range an extra 150m over Cat 5e (or higher) cables. The use of an additional repeater means the audio/video signals can be transmitted over even longer distances, up to 450m.

Furthermore, for longer distance installations where video signals may degrade, the VB552 has adjustable video gain and compensation controls to provide the sharpest video quality possible. An IR remote control also provides picture control at the remote site.

Rack-mountable, with two RS-232 channels on the unit for selection, and support for high video resolutions, the VB552 is the perfect solution to extend the range of your A/V and serial transmissions in any installation environment requiring VESA FDMI mount standards.

Datasheet

Designed for use in Digital Signage applications, the AdderLink AV Series is a range of audiovisual extenders delivering high video resolutions and superb quality audio up to 300m using standard CATx cable (x=5,5e,6,7).

This item comprises of an AV 100T transmitter unit and an AV 100R

Data SheetFurther information on the range

TRANSMITTER ONLY. The AV 100T transmitter unit has a local port to connect a local screen and speakers or for cascading other Adderlink AV100 Transmitter units.

Data SheetFurther information on the range

RECEIVER ONLY. AdderLink AV 100R duplicates input from transmitter allowing for 2 video and 2 audio outputs

Data SheetFurther information on the range

RECEIVER ONLY. AdderLink AV 101R Duplicates input from transmitter allowing for 2 video and 2 audio outputs, has integrated skew adjustment allowing the receiver to be located further from the transmitter and/or cope with higher video resolutions, can be used as a receiver up to 300m from AdderLink AV 100T or AdderLink AV 104T transmitters and has local cascade port allowing for other receivers to be cascaded from the original receiver.

Data SheetFurther information on the range

TRANSMITTER ONLY. The AV 104T transmitter unit extends a single high-resolution video and high fidelity audio signal to 4 different receivers and has a local port to connect local screen and speakers or to cascade to other AdderLink AV 104T transmitter units.

Data SheetFurther information on the range

The AdderLink AV200 series have the following features;

• Crystal clear digital audio quality at 44.1kHz Stereo
• Crisp, sharp, fully saturated video quality even at 1000ft
• Resolution up to 1600x1200@60Hz
• Compact size
• Compact rack-mountable chassis for large installations
• Receiver units with fully adjustable de-skew ensuring maximum video quality
• Cascade transmitters to support up to 64 VDUs from a single source
• Dual video/audio output on the receiver supports back to back monitors applications

Further information on the ALAV200Data SheetManual


AWAITING STOCKIn stock Price: £295.00 (£354.00 Including VAT at 20%)

Transmitter unit only - for use with an AV200 series Receiver

The AdderLink AV200 series have the following features;

• Crystal clear digital audio quality at 44.1kHz Stereo
• Crisp, sharp, fully saturated video quality even at 1000ft
• Resolution up to 1600x1200@60Hz
• Compact size
• Compact rack-mountable chassis for large installations
• Receiver units with fully adjustable de-skew ensuring maximum video quality
• Cascade transmitters to support up to 64 VDUs from a single source
• Dual video/audio output on the receiver supports back to back monitors applications

Further information on the ALAV200Data SheetManual


AWAITING STOCKIn stock Price: £130.00 (£156.00 Including VAT at 20%)

Transmitter unit only - requires receiver units

The AdderLink AV200 series have the following features;

• Crystal clear digital audio quality at 44.1kHz Stereo
• Crisp, sharp, fully saturated video quality even at 1000ft
• Resolution up to 1600x1200@60Hz
• Compact size
• Compact rack-mountable chassis for large installations
• Receiver units with fully adjustable de-skew ensuring maximum video quality
• Cascade transmitters to support up to 64 VDUs from a single source
• Dual video/audio output on the receiver supports back to back monitors applications

Further information on the ALAV200Data SheetManual


AWAITING STOCKIn stock Price: £299.00 (£358.80 Including VAT at 20%)

Transmitter unit only - requires receiver units

The AdderLink AV200 series have the following features;

• Crystal clear digital audio quality at 44.1kHz Stereo
• Crisp, sharp, fully saturated video quality even at 1000ft
• Resolution up to 1600x1200@60Hz
• Compact size
• Compact rack-mountable chassis for large installations
• Receiver units with fully adjustable de-skew ensuring maximum video quality
• Cascade transmitters to support up to 64 VDUs from a single source
• Dual video/audio output on the receiver supports back to back monitors applications

Further information on the ALAV200Data SheetManual


AWAITING STOCKIn stock Price: £349.00 (£418.80 Including VAT at 20%)

Receiver unit only - used in conjunction with AV200 series Transmitters

The AdderLink AV200 series have the following features;

• Crystal clear digital audio quality at 44.1kHz Stereo
• Crisp, sharp, fully saturated video quality even at 1000ft
• Resolution up to 1600x1200@60Hz
• Compact size
• Compact rack-mountable chassis for large installations
• Receiver units with fully adjustable de-skew ensuring maximum video quality
• Cascade transmitters to support up to 64 VDUs from a single source
• Dual video/audio output on the receiver supports back to back monitors applications

Further information on the ALAV200Data SheetManual

Receiver unit only - used in conjunction with AV200 series Transmitters

The AdderLink AV200 series have the following features;

• Crystal clear digital audio quality at 44.1kHz Stereo
• Crisp, sharp, fully saturated video quality even at 1000ft
• Resolution up to 1600x1200@60Hz
• Compact size
• Compact rack-mountable chassis for large installations
• Receiver units with fully adjustable de-skew ensuring maximum video quality
• Cascade transmitters to support up to 64 VDUs from a single source
• Dual video/audio output on the receiver supports back to back monitors applications

Further information on the ALAV200Data SheetManual


AWAITING STOCKIn stock Price: £220.00 (£264.00 Including VAT at 20%)

• CatX Video Rx for distances up to 120m
• CatXQ Video Rx for distances up to 300m
• CatX Video Rx 2 for two VGA outputs up to 120m
• CatXQ Video Rx 2 for two VGA outputs up to 300m (includes skew correction)