KVM Switch Direct | Aten | Aten Rack Mountable KVM Switches
A 4 port rack-mountable KVM switch which supports both PS/2 and USB connections. The switch is fully cascadable to support a total of 64 computers.
See the links below for more information on this switch
Suitable CablesManualProduct spec. sheet
*** LIMITED OFFER - Includes 4 x 1.8m Cable sets ***
A 8 port rack-mountable KVM switch which supports both PS/2 and USB connections. The switch is fully cascadable to support a total of 512 computers.
*** Limited offer - Price includes 8 x 1.8m cable sets ***
Read ManualData Sheet
The CS1768 8-port USB DVI KVM Switch is a control unit that allows access and control of up to 8 computers from a single USB keyboard, USB mouse, and dual-monitor (DVI-I and VGA) console. It can be cascaded to three levels allowing up to 73 CS1768s to control up to 512 computers all from the original single console.
In addition, the CS1768 comes with ATEN’s new Video DynaSync technology, which optimizes display resolution.
There are three convenient methods to access any computer connected to the installation: (1) using the pushbutton port selection switches located on each unit's front panel; (2) entering Hotkey combinations from the keyboard; and (3) selecting from menus provided by the on-screen display (OSD). An Auto Scan feature also permits automatic scanning and monitoring of the activities of all computers running on the installation one by one.
The CS1768 provides multimedia keyboard support and is audio enabled. Two microphones can provide audio input to each of the computers, and you can listen to the audio output of each computer on two sets of speakers (on a one-at-a-time basis).
*** Price includes 8 cables ***
*** Price includes 8 cables, use link above for additional cables ***
The CM1164 4 port USB DVI-D KVMP Control Center combines a 4-port DVI-D switch with a 2-port USB hub. Providing various display modes: Quad View mode, which simultaneously displays four digital computers/video sources on a single screen; as well as Picture in Picture mode (Dual, Triple or Quad) and Full Screen mode.
In addition, CM1164 provides Daisy Chain Control (DDC) functionality. A (DCC) port allows a user to connect and control up to four CM1164 units via a single console. This enables the use of only one keyboard/mouse over several computers or another CM1164.This is convenient for growing networks that need to monitor and manage more computers - daisy chain up to four units and switch between up to 16 computers.
The CM1164 provides a solution for a wide range of practical applications, including control rooms, monitoring systems, and traffic control centres allowing you to switch seamlessly between four DVI-enabled PCs, and share USB peripherals and audio from a multi-view console.
The KH1508A KVM switches are control units that allow IT administrators to access and control multiple computers from a single PS/2 or USB KVM console (keyboard, monitor, and mouse). Operators can take control of up to 8 computers. By daisy chaining up to 31 additional switches, as many as 256 computers can be controlled from the original KVM console.
These switches have been designed with unique and powerful features that enable administrators to manage their entire server room and data center devices easily and conveniently.
Data sheet (PDF)interface modules
The KH1508Ai KVM Switch is a control unit that allow access to multiple computers from a single KVM console. It uses TCP/IP for its communications protocol, and can be accessed from any computer on the Net - whether that computer is located down the hall, down the street, or half-way around the world.
ManualQuickstart Guideinterface modules
Includes 8x USB CPU interface modules (or PS2 and USB mix on request)
*** LIMITED OFFER - Includes 16 x 1.8m Cable sets ***
For a clean and simple high density cable management solution, the KH1516 uses an RJ45 connection on the KVM side and Cat 5 cable to connect to an adapter that, in turn, connects to the servers.
Adapters are available for connecting to PS2, USB (PC and MAC), Sun USB, Legacy Sun, and Serial Devices. The KVM / adapter arrangement intercepts and interprets mouse and keyboard signals, there by eliminating the need to install any software on your servers, and giving the KH1516 the ability to work with practically any operating system in any type of server environment.
Includes 8 x USB Computer cables
The KH1516i KVM Switch is control unit that allows access to multiple computers from a single KVM console. It uses TCP/IP for its communications protocol, it can be accessed from any computer on the Net - whether that computer is located down the hall, down the street, or half-way around the world.
Includes 8 x USB (or PS2 and USB mix on request) cables
This Item is no longer manufactured
Suitable CablesRead Manual (PDF) More Information in stock.
The KH1508 features RJ-45 connectors and Cat 5 cable to link to the computers. Combined with Auto Signal Compensation (ASC) signals can travel up to 40 meters and still maintain high video resolution.
KVM Switch Direct is a trading name of End Design Limited. Manufacturers and Distributors of connectivity solutions since 1984
Unit 37 Bookham Industrial Park Church Road, Bookham KT23 3EU
Company No. 1920982 VAT Registration: GB 384 3922 29
Click here to email us
Adder AtenAustin HughesGuntermann & DrunckHDAnywhereRaritan Rextron SY Electronics
About usTestimonialsContact UsWEEE
Purchasing & Returns
Ways to BuyReturnsFAQs