UCE60 lets you locate your USB device or hub up to 60m (198 ft) from you computer, overcoming the typical USB cable limitation. It conditions the USB signals to communicate up to 60m using low-cost Cat 5/Cat 5e/Cat 6 cable.

• USB 1.1 compliant.
• Provides support for any full-speed (12Mb/s) or low-speed (1.5Mb/s) USB devices.
• Extends the transmission distance of a USB device up to 60m (198 ft) using Cat 5/ Cat 5e/ Cat 6 cabling.
• Embedded USB 1.1 Transceivers prevent signal loss.
• Lowest cost solution for extending USB signals.
• No additional installation software required.
• LED indicates when additional external power supply needed.
• Multiplatform support: Windows 2000/XP/Vista?Mac.

Cat5 CablingData Sheet

Price: £33.00 (£39.60 Including VAT at 20%)  
AWAITING STOCKIN STOCK

The CE100 USB KVM Extender with superior video quality and built-in ESD protection allows access to a computer system from a remote USB console (USB keyboard, USB mouse, and monitor).

The CE100 improves on previous designs with a compensation adjustment function at the Remote unit for greater video quality

Cat5 CablingData Sheet

The CE700A is a USB KVM Extender with superior video quality and built-in ESD and surge protection that allows access to a computer system up to 150 meters away from a remote USB console (USB keyboard, monitor, and USB mouse)

Cat5 CablingManualData Sheet

Price: £139.54 (£167.45 Including VAT at 20%)  
AWAITING STOCKIN STOCK

The CE770 is a USB based KVM Extender with Deskew function. The automatic signal compensation and RS-232 serial functionality allow access to a computer system from a remote USB console.

• Local and Remote Units connect at distances up to 300 m using Cat 5e cable
• Dual console operation - control your system from both the local and remote USB keyboard, monitor, and mouse consoles
• Deskew Function - automatically synchronizes the time delay of RGB signals to compensate for distance
• Built-in ASIC for greater reliability and compatibility
• Auto Signal Compensation (ASC)
• RS-232 serial ports - allow you to connect to a serial terminal, or serial devices such as touchscreens and barcode scanners
• Sun/Mac keyboard support and emulation
• Audio Enabled - supports stereo speakers and microphone
• High resolution video - up to 1920 x 1200@60Hz (150 m); 1280 x 1024@60Hz (300 m)

Cat5 CablingDatasheet



Price: £461.76 (£554.11 Including VAT at 20%)  
AWAITING STOCKIN STOCK

The CE800B USB KVM Extender with on-board audio allows access to a computer system from a remote console (USB keyboard and mouse, monitor, stereo speakers, and microphone). It is perfect for factory and construction sites, or any type of installation where the console needs to be in a conveniently accessible location, but you want the system equipment to reside in a safe place away from dust, dirt, and harsh environmental influences.

The CE800B has built-in USB ports that support USB Mass Storage compliant flash drives. The addition of a Type B USB port on the local unit means that the flash drive facility is fully supported in both PC-only and KVM switch installation.

• Cat 5e cable to connect the Local and Remote Units - up to 250 m (825 ft) apart
• Dual console operation - control your system(s) from both the local and remote consoles
• Pushbutton selection of the active console Built-in USB port on both units supports external USB Mass Storage compliant flash drives for easy file sharing
• Special security feature requires login when mounting an external USB storage device on the remote unit
• Supports VGA, SVGA, and multisync monitors local monitor supports DDC; DDC2; DDC2B
• High resolution video - up to 1600 x 1200 @ 60 Hz Built-in 8KV/15KV ESD protection and 2KV surge protection
• Adjustable gain control - automatically and manually adjusts signal strength to compensate for distance
• Supports stereo speakers and stereo microphone
• Supports Microsoft Intellimouse and the scrolling wheel on most mice
• Upgradable firmware Built-in ASIC for greater reliability and compatibility

Datasheet

Price: £232.00 (£278.40 Including VAT at 20%)  
AWAITING STOCKIN STOCK

The ATEN CE774 Dual View KVM Extender allows access to a computer system from a remote Dual View console up to 150 m away.

• Dual View Support - connect two screens to transmit two video output signals to a remote site up to 150 m away using inexpensive Cat 5e/6 cables
• Dual Console operation - control your system from both the local and remote USB keyboard, monitor, and mouse consoles
• PC Wakeup support - from the remote console, simply use a pushbutton to wake a computer at the local site via RS-232
• Superior video quality - 1920x1200@60Hz(30 m), 1600x1200@60Hz(150 m)
• Gain/Compensation Control - adjusts signal strength in order to compensate for distance
• RS-232 Channel allows you to connect to a serial terminal,or serial devices such as touchscreens and barcode scanners
• Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV)
• Sun/Mac keyboard support and emulation - PC keyboard combinations emulate Sun/Mac keyboards -. Sun/Mac keyboards only work with their own computers

Cat5 CablingData Sheet

The ATEN CE775 Dual View KVM Extender allows access to a computer system from a remote Dual View console up to 300 m away.

• Dual View Support - connect two screens to transmit two video output signals to a remote site up to 300 m away using inexpensive Cat 5e/6 cables
• Dual Console operation - control your system from both the local and remote USB keyboard, monitor, and mouse consoles
• PC Wakeup support - from the remote console, simply use a pushbutton to wake a computer at the local site via RS-232
• Superior video quality - 1920x1200@60Hz(150 m), 1280x1024@60Hz(300 m)
• Gain/Compensation Control - adjusts signal strength in order to compensate for distance
• On Screen Display - conveniently adjust video quality with the intuitive OSD menu system
• RS232 Channel allows you to connect to a serial terminal,or serial devices such as touchscreens and barcode scanners
• Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV)
• Sun/Mac keyboard support and emulation - PC keyboard combinations emulate Sun/Mac keyboards -. Sun/Mac keyboards only work with their own computers

Cat5 CablingData Sheet

The CE600 is a DVI and USB KVM Extender with RS-232 serial functionality. It allows access to a computer system from a remote console (USB keyboard, monitor, and mouse). for use in any type of installation where you need to place the console where it is conveniently accessible, but you want the system equipment to reside in a safe location away from the dust and dirt of the factory floor, or the harsh environmental influence of a construction site, for example.

The CE600 uses one Cat 5e cable (DVI Single Link) to support up to 1920 x 1080 video resolution. A second Cat 5e cable is used for HDCP, RS-232, and microphone signals.

The CE602 is a DVI Dual link and USB KVM Extender with RS-232 serial functionality. It allows access to a computer system from a remote console (USB keyboard, monitor, and mouse). for use in any type of installation where you need to place the console where it is conveniently accessible, but you want the system equipment to reside in a safe location away from the dust and dirt of the factory floor, or the harsh environmental influence of a construction site, for example.

The CE602 can support up to 2560 x 1600 (DVI Dual Link) resolution. It uses two Cat 5e cables for HDCP, RS-232, microphone and dual link signals. You can also use just one Cat 5e cable if using single link connections.

The KE8220 is a wireless presentation system offering the ability to transmit any computer's desktop environment to a projector or display over a network for high quality presentations. With a standard VGA connector (HDB-15) and 802.11b/g capability, the KE8220 ensures compatibility with the widest range of display devices available while enabling wireless presentations without cable swapping. A user-friendly AltusenVNC software is downloadable from KE8220's embedded web server, allowing anyone in the meeting to switch focus between computers seamlessly with a single mouse-click. This plug and play device is compatible with all major Windows operating systems, including Windows 2000, XP, 2003 and Vista. The KE8220 is an exceptional meeting room tool that can streamline presentations and enhance productivity.

The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet.An intuitive On Screen Display on both the transmitter and receiver units for easy setup and operation over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch. The addition of an RS-232 port, on both the transmitter and receiver Units allows for serial devices such as touchscreens and barcode scanners. Note: Multipoint configurations require a separate purchase contact us for details.

In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. If you do not know how to enable IGMP, please contact your network administrator

The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet.An intuitive On Screen Display on both the transmitter and receiver units for easy setup and operation over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch. The addition of an RS-232 port, on both the transmitter and receiver Units allows for serial devices such as touchscreens and barcode scanners.

Note: This part code is for a transmitter unit ony for use with the CE790R receiver unit.

The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet.An intuitive On Screen Display on both the transmitter and receiver units for easy setup and operation over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch. The addition of an RS-232 port, on both the transmitter and receiver Units allows for serial devices such as touchscreens and barcode scanners.

Note: This part code is for a receiver unit ony for use with the CE790T transmitter unit.

The CE750 is a USB based KVM Extender with automatic signal compensation and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse). The CE750 improves on previous designs by the addition of an RS-232 port, on both the Local and Remote Units, that allows you to connect to a serial terminal for configuration (Local Unit), or serial devices such as touchscreens and barcode scanners (Remote Unit)

Cat5 CablingData Sheet

The CE250 features a custom ASIC that ensures the utmost in reliability and compatibility. It senses the distance to the computer and automatically adjusts the gain to compensate.

• Reliably connect remote units up to 150m (500ft.)
• Dual Console operation - Control your sytem from both local and remote PS/2 Keyboard, Mouse and Monitor consoles
• Video - up to 1280x1024
• Local minitor supports DDC, DDC2 and DDC2b
• Automatic gain control compensates for signal strength

Cat5 CablingManualData Sheet

Cat5 CablingManualData Sheet More Information

   in stock.